BXSD-0960-15A BLDC Motor Driver Board with Heatsink, 9-60VDC Input Max Current 17A
Mdel No. BXSD-0960-15A-MG
BLDC motor driver module
(For 120 degree Hall sensor BLDC motor)
Input voltage: 9-60VDC
Working current: 0.1-17A
Hall sensor voltage: 4.5-5.5V
Hall sensor angle: 120 degree
Operating Temp. :-20-60 degree Celsius
Speed control: 0-5V,10K-20K,potentiometer/PWM 200-2000Hz, 0-100 duty cycle
Protections: Locked-rotor protection, over voltage and over current protection.
Application guidelines
1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are same,
you can adjust the Hall wires sequence and motor three‐phase sequence according to the actual situation, to
achieve the best driving effect.
3. BXSD‐0960‐15A‐MG is BLDC motor driver board with heatsink and built‐in connectors, it can used for
12V,24V,36V,48V,60V motors ,Please keep good ventilation for cooling if the motor is more than 300W.
4. The 5V output port(below 100mA) on the driver board is forbidden to connect external power equipment, It
is only applicable to external potentiometer and BLDC motor’s Hall sensors
Wiring diagram
2. Power port
A ‐‐‐‐motor phase U
B ‐‐‐‐ motor phase V
C‐‐‐‐ motor phase W
GND ‐‐‐‐DCVCC‐‐‐‐
DC+
3:Hall sensor port
Ha‐‐‐ Hall a
Hb‐‐‐Hall b
Hc‐‐‐Hall c
GND‐‐‐GND
5V‐‐‐5V
4:Control port
VI—0‐5V /PWM speed control
FB—Forward/Backward
BK—Brake function (0‐5V linear brake, 0‐100% brake power)
SP—Speed pulse output.
5. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead
to abnormal driving, affecting the normal use.
6. Control port distance: 2.54mm,Power port distance:7.62 mm
Dimensional Drawing
Product Tags:
|
|
BXSD-0960-15A BLDC Motor Driver Board with Heatsink, 9-60VDC Input Max Current 17A Images
|
